EJTAG ID Codes and Implementation Registers

From Embedded Xinu
Jump to: navigation, search

When an EJTAG system is reset, the data register is automatically filled with the result of an IDCODE instruction. This code usually includes the processor and the manufacturer, although it is not a standard. The important part of the IDCODE is using it to determine if your host hardware is communicating with your target. Whether or not the host speaks fluent jtag, if it can navigate to the data register and shift out the contents, one can see if the electrical connection is sound.

IDCODEs

WT54GLv1.1 : 0x0535217F

WRT54Gv8 : 0x1535417F

WRT350Nv1.0 : 0x0478517F


The implementation code instruction returns an indication of features on the particular platform. Below is the information from the MIPS EJTAG Specification, document #MD00047.

IMPCODEs

WT54GLv1.1 : 0x00800904

WRT54Gv8 : 0x00810904

WRT350Nv1.0 : 0x00810904

Impcode.png

Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox