Connect to a modified router

From Embedded Xinu
Revision as of 18:58, 6 September 2006 by Justin (Talk | contribs)

Jump to: navigation, search

Once we have the router powered up, connecting is as simple as plugging the serial ports into a machine with the proper software to communicate over it (such as Kermit).

In our setup, once running Kermit on the external machine, we connected by typing in:

set line /dev/tty000      to connect to the device talking to the router.
set serial 8n1      which is not really necessary since this is default.
set speed 115200      as given to us in the router specifications.

Once connected, you may need to press Enter to get a console from OpenWRT.

Also, because the goal is to upload custom kernels to the router, it would be a good idea to connect the router to your network by wiring it up via one of the numbered LAN ports on the back of the router (NOT the Internet/WAN port).

Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox